Symmetra 48K IP Change

[Anonymous user]

I have just inherited a DC with a Symmetra 48K UPS , I need to change the management IP to a different subnet, that bits fine. The GUI states some changes may need a reboot, I just need to confirm that this 'reboot' is just the management card and will have no impact on the power being supplied to the DC.

Thanks.

[BillP · Accepted solution]

Hi,

Log into the network management card and make the change to the subnet. The go to Control - network - Reset/Reboot and select Reboot Management Interface and click apply and then click apply again when asked. The network management card will reboot (not the Symmetra just the card). During the reboot the new subnet will be applied.