Schneider, APC support forum to share knowledge about installation and configuration for Data Center and Business Power UPSs, Accessories, Software, Services.
Send a co-worker an invite to the portal.Just enter their email address and we'll connect them to register. After joining, they will belong to the same company.
You have entered an invalid email address. Please re-enter the email address.
This co-worker has already been invited to the Exchange portal. Please invite another co-worker.
Please enter email address
Send InviteCancel
Invitation Sent
Your invitation was sent.Thanks for sharing Exchange with your co-worker.
Link copied. Please paste this link to share this article on your social media post.
Posted: 2021-06-2807:30 AM. Last Modified: 2024-03-1812:24 AM
SMT3000RMI2U Battery replace
I have the new battery but the UPS powers a few machines that I would rather not turn off for the replacement procedure. Is it hot-swappable model? Can I replace the battery without power down the UPS before changing the battery?
Link copied. Please paste this link to share this article on your social media post.
Posted: 2021-06-2807:30 AM. Last Modified: 2024-03-1812:24 AM
Hi Danilo,
Yes, you can hot swap the batteries in this unit. Just remember that if there was a power outage during the short span of time that no battery is connected, you would not have any battery back up. Once you have the new battery installed, allow it to charge to 100% and then run a self test. This wil clear the replace battery indicator.
Link copied. Please paste this link to share this article on your social media post.
Posted: 2021-06-2807:30 AM. Last Modified: 2024-03-1812:24 AM
Hi Danilo,
Yes, you can hot swap the batteries in this unit. Just remember that if there was a power outage during the short span of time that no battery is connected, you would not have any battery back up. Once you have the new battery installed, allow it to charge to 100% and then run a self test. This wil clear the replace battery indicator.