SMT1500RMI2U and APC AP9631 no Power output shown

[BillP]

Hello,

i have some questions about the Status that my Network Card is giving me. (on the Info Pannel  of my UPS i get the same Info)

Smart-UPS 1500

Last Battery Transfer

Detection of distorted input

Battery Temperature

22.9°C

Runtime Remaining

5hr 3min

UPS Input

Input Voltage

228.9  VAC @  50.0  Hz

UPS Output

Output Voltage

228.9  VAC @  50.0  Hz

Load Current

0.0  Amps

Output VA

0.0 %

Output Watts

0.0 %

Output Efficiency

load too low

Output Energy Usage

0.00 kWh

Battery Status

State of Charge

90.0 %

Battery Voltage

27.3  VDC

Next Battery Replacement Date

20.06.2021

as you can see, the Output shows allways 0, with running systems.

Maybe some hints how i can see that values?

Thx 

Andy

[BillP]

Hi,

What is the load you have on the UPS. It looks to be too low to register. Try increasing the load and it should register. 

[BillP · Accepted solution]

Yes that was the problem,

it was only an lowpower backup server connected for test.

Thx