Welcome to the new Schneider Electric Community

It's your place to connect with experts and peers, get continuous support, and share knowledge.

  • Explore the new navigation for even easier access to your community.
  • Bookmark and use our new, easy-to-remember address (community.se.com).
  • Get ready for more content and an improved experience.

Contact SchneiderCommunity.Support@se.com if you have any questions.

Close
Invite a Co-worker
Send a co-worker an invite to the Exchange portal.Just enter their email address and we’ll connect them to register. After joining, they will belong to the same company.
Send Invite Cancel
84817members
354269posts

RADIUS attribute documentaion

APC UPS Data Center & Enterprise Solutions Forum

Schneider Electric support forum for our Data Center and Business Power UPS, UPS Accessories, Software, Services, and associated commercial products designed to share knowledge, installation, and configuration.

Solved
bobjunga_apc
Ensign
Ensign
0 Likes
1
215

RADIUS attribute documentaion

This was originally posted on APC forums on 11/13/2015


We have 8xxx serries APC pdus which will soon all be running 6.3.3. (current firmware release).

Are the required and supported radius attributes the the server should read and return documented somewhere? I was not able to find it by searching.  We do not use AD which I assume its mostly tested against. We use FreeRADIUS on linux with an OpenLDAP server.  If I know what te pdus are sending and what they expect, I can configure our RADIUS server to comply. In the past I have gotten radius authentication to work but at some point (maybe when we upgraded to 5.1.6?) it stopped working. It would help to know what the server should be returning instead of having to sleuth it from watching the packets. I expect that there might be new capabilities in the 6.x firmware since it supports new user types/roles.

--BobG

Tags (4)

Accepted Solutions
BillP
Administrator Administrator
Administrator
0 Likes
0
217

Re: RADIUS attribute documentaion

This reply was originally posted by Angela on APC forums on 11/16/2015


Hi Bob,

Take a look here (http://www.apc.com/resource/include/techspec_index.cfm?base_sku=AP8841&tab=documentation) and refer to the "Security Handbook v6.X.X" link at the bottom of the "manuals and warranties" group and see if it has what you need. FYI, I just used AP8841 as an example product SKU in the previous link but no matter what model of AP8XXX PDU you have, the Security Handbook/guide is the same.

Here are some other RADIUS resources in the knowledge base (http://www.apc.com/site/support/index.cfm/faq/😞

Hope that helps get you started in the right direction.

See Answer In Context

1 Reply 1
BillP
Administrator Administrator
Administrator
0 Likes
0
218

Re: RADIUS attribute documentaion

This reply was originally posted by Angela on APC forums on 11/16/2015


Hi Bob,

Take a look here (http://www.apc.com/resource/include/techspec_index.cfm?base_sku=AP8841&tab=documentation) and refer to the "Security Handbook v6.X.X" link at the bottom of the "manuals and warranties" group and see if it has what you need. FYI, I just used AP8841 as an example product SKU in the previous link but no matter what model of AP8XXX PDU you have, the Security Handbook/guide is the same.

Here are some other RADIUS resources in the knowledge base (http://www.apc.com/site/support/index.cfm/faq/😞

Hope that helps get you started in the right direction.