OID for Output Relay on AP9340

kudrow_apc · ‎2021-06-25

Hi all,

Does anyone have an OID for the Output Relay (status open/closed etc.) on a AP9340 environmental monitor? A quick Google search didn't return may successful results.

Thanks!

BillP · ‎2021-06-25

Brady,

You can use a toll such as GetIf (freeware) to walk the MIB and find the OID. I do not have access to a AP9340 but when I walk a AP9319 to view the relay status I see OID .1.3.6.1.4.1.318.1.1.10.3.2

See Answer In Context

BillP · ‎2021-06-25

Hi Brady,

Most of the OIDs for this device are under .iso.org.dod.internet.private.enterprises.apc.products.hardware.environmentalMonitor.modEnvMgr / .1.3.6.1.4.1.318.1.1.10.4 in the APC PowerNet MIB.

I tried on an AP9340 and I think what you're looking for is .iso.org.dod.internet.private.enterprises.apc.products.hardware.environmentalMonitor.modEnvMgr.memOutputs.memOutputStatusTable.memOutputStatusEntry.memOutputStatusCurrentState or .1.3.6.1.4.1.318.1.1.10.4.4.2.1.5 . Mine responded with memOutputOpen.

There are a few other OIDs under modEnvMgr.memOutputs that may be of help too like the normal state, etc.

BillP · ‎2021-06-25

Brady,

You can use a toll such as GetIf (freeware) to walk the MIB and find the OID. I do not have access to a AP9340 but when I walk a AP9319 to view the relay status I see OID .1.3.6.1.4.1.318.1.1.10.3.2