Network managment card with AP9520TH

Anonymous user · ‎2021-06-28

Hello,
I'm after a cable that I can use to connect AP9520TH sensor to Network Management card temperature sensor port (PS2 type), so the cable will have CAT5 on one side and other end should be PS2. Is this possible.? I know AP9520TH should go into A-Link port of APC Environmental monitoring unit but trying to make use of the spare AP9520TH. Thanks

BillP · ‎2021-06-28

unfortunately, the NMC only supports AP9512TBLK or AP9512THBLK. A-link is a proprietary APC protocol that is not supported by the network management cards, only by the EMU/EMS systems (AP9320/AP9340).

See Answer In Context

BillP · ‎2021-06-28

unfortunately, the NMC only supports AP9512TBLK or AP9512THBLK. A-link is a proprietary APC protocol that is not supported by the network management cards, only by the EMU/EMS systems (AP9320/AP9340).