Welcome to the new Schneider Electric Community

It's your place to connect with experts and peers, get continuous support, and share knowledge.

  • Explore the new navigation for even easier access to your community.
  • Bookmark and use our new, easy-to-remember address (community.se.com).
  • Get ready for more content and an improved experience.

Contact SchneiderCommunity.Support@se.com if you have any questions.

Close
Invite a Co-worker
Send a co-worker an invite to the Exchange portal.Just enter their email address and we’ll connect them to register. After joining, they will belong to the same company.
Send Invite Cancel
84262members
353367posts

MIB for Galaxy 5000 60 kVA

APC UPS Data Center & Enterprise Solutions Forum

Schneider Electric support forum for our Data Center and Business Power UPS, UPS Accessories, Software, Services, and associated commercial products designed to share knowledge, installation, and configuration.

Solved
floydatc_apc
Cadet
0 Likes
3
233

MIB for Galaxy 5000 60 kVA

This was originally posted on APC forums on 6/5/2013


Unlike the smaller APC models, the Galaxy 5000 60 kVA seems to use SNMPv2-SMI::enterprises.705, which I can't find any MIB file for. I've been searching for this for a couple of days now but found nothing. Does anyone have a link please?

Tags (5)

Accepted Solutions
BillP
Administrator Administrator
Administrator
0 Likes
0
234

Re: MIB for Galaxy 5000 60 kVA

This reply was originally posted by oliver on APC forums on 6/4/2016


We too are looking for the MIB file for our GALAXY 5000 50 kVA - 358 and am unclear on which one applies to us. The models listed above - how do I determine which we have?

Thanks

See Answer In Context

3 Replies 3
BillP
Administrator Administrator
Administrator
0 Likes
0
234

Re: MIB for Galaxy 5000 60 kVA

This reply was originally posted by Angela on APC forums on 6/5/2013


While I am checking into this, could you please just verify what MGE management card is installed in your UPS? Is it something like 66074?

BillP
Administrator Administrator
Administrator
0 Likes
0
234

Re: MIB for Galaxy 5000 60 kVA

This reply was originally posted by Angela on APC forums on 6/5/2013


I found my answer:

If you have a 66074 the MIB information is at the bottom of the link:

http://soft.apc.com/emb/htm/66074e.htm

If you have the 66123 or 66124, the MIB information is at the bottom of the link (EMEA 3-phase):

http://soft.apc.com/emb/htm/66123e.htm

BillP
Administrator Administrator
Administrator
0 Likes
0
235

Re: MIB for Galaxy 5000 60 kVA

This reply was originally posted by oliver on APC forums on 6/4/2016


We too are looking for the MIB file for our GALAXY 5000 50 kVA - 358 and am unclear on which one applies to us. The models listed above - how do I determine which we have?

Thanks