Firmware chage log?

[Anonymous user]

I'm looking at upgrading the firmware on our switched PDUs (AP7902, AP7932). I know we are out of date, and I have downloaded the newest versions. Is there is a changelog somewhere that describes what improvements have been made for each version? I did not find one on the web site.

Thanks.

[Anonymous user]

I'm looking at upgrading the firmware on our switched PDUs (AP7902, AP7932). I know we are out of date, and I have downloaded the newest versions. Is there is a changelog somewhere that describes what improvements have been made for each version? I did not find one on the web site.

Thanks.

[Anonymous user]

Go to APC.com and click "Support", then click "Software & Firmware" from the Self-Help list on the leff hand side. Then select "Firmware Upgrades - Rackmount Power Distribution" from the pop-down list under "Filter by Software Firmware" and click Submit. Doing this will give you rpdu versions 2.74, 3.3.1, 3.3.3, 3.5.5 to chose from.

There is also some older PDU stuff listed at:

ftp://ftp.apcc.com/apc/public/hardware/

Cheers,
Dave

[Anonymous user]

From everything I can see, this only brings up the list of firmware upgrades to download. What people a looking for is a place that lists the changes made from "version x" to "version y". Not only can I not find them on the site, there isn't even a change log in the downloaded update file.

[TheNotoriousKMP_apc]

If you are specifically looking for something say, the changes between 331 and 355 of a Smart-UPS firmware, all the changes are made in the release notes and covered in the first section of each .txt file.

http://www.apcc.com/tools/download/index.cfm?dl_method=display_manuals&part_num=SFSUMX355

[Anonymous user · Accepted solution]

There are several firmware releases that are currently available for PDU's. How can I get to see the release notes/change long for each version? I have searched high and low - the only one I have found is this thread for 3.5.5.