Few installation,commisioning questions on 3 phase UPS system.

Anonymous user · ‎2021-06-26

Hi

Have a few questions on a UPS system we are about to purchase.

We are in the process of purchasing a APC SUVTP40KH4B4S as well as an extended run enclosure (APC SUVTBXR6B6S) and I have just have a few questions on the commisioning and installation part of the UPS. I am based in the UK.

As part of the startup service can I ask whether the APC engineer will be connecting the battery pack to the UPS?

Would the input to the UPS normally be at 100amp three phase and neutral?

Does it need to be lower than this e.g. 80 amps?

If anyone is able to advise on these questions it would be greatly appreciated.

Thanks

BillP · ‎2021-06-26

The Ups Needs To Be On A 80Amp Breaker No Higher

I Would Imagine APC Would Hook Up The Battery

See Answer In Context

BillP · ‎2021-06-26

The Ups Needs To Be On A 80Amp Breaker No Higher

I Would Imagine APC Would Hook Up The Battery