
Posted: 2021-06-28 11:32 AM . Last Modified: 2024-03-15 04:58 AM
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Email to a Friend
- Report Inappropriate Content
Link copied. Please paste this link to share this article on your social media post.
Posted: 2021-06-28 11:32 AM . Last Modified: 2024-03-15 04:58 AM
Discontinued AP7723 HW v01 FW Upgrade
So, after 5 years we got our AP7723 running on our network (the device itself is in use since 2016)....
Now we like to upgrade the firmware (there are only four REALLY old ciphersuites installed and we can't activate https, newer browser won't connect).
Installed is 3.0.5 from 2011! I only found the 3.9.2, but it is for AP7723 HW v02. Could I use this? Or does someone have the latest (even when they are some years old) FW for the HW v01 Model?
Kind regards
Martin
- Labels:
-
Smart-UPS & Symmetra LX | RM
Link copied. Please paste this link to share this article on your social media post.
Accepted Solutions
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Email to a Friend
- Report Inappropriate Content
Link copied. Please paste this link to share this article on your social media post.
Posted: 2021-06-28 11:32 AM . Last Modified: 2024-03-15 04:57 AM
Hi Martin,
This one should work for you:
https://www.apc.com/shop/ie/en/products//P-SFATS392
Just a note, please read the below KBase before updating to prevent damaging the unit:
https://www.apc.com/ie/en/faqs/FA156178/
-Gavan
Link copied. Please paste this link to share this article on your social media post.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Email to a Friend
- Report Inappropriate Content
Link copied. Please paste this link to share this article on your social media post.
Posted: 2021-06-28 11:32 AM . Last Modified: 2024-03-15 04:57 AM
Hi Martin,
This one should work for you:
https://www.apc.com/shop/ie/en/products//P-SFATS392
Just a note, please read the below KBase before updating to prevent damaging the unit:
https://www.apc.com/ie/en/faqs/FA156178/
-Gavan
Link copied. Please paste this link to share this article on your social media post.

Posted: 2021-06-28 11:33 AM . Last Modified: 2024-03-15 04:57 AM
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Email to a Friend
- Report Inappropriate Content
Link copied. Please paste this link to share this article on your social media post.
Posted: 2021-06-28 11:33 AM . Last Modified: 2024-03-15 04:57 AM
Hi Gavan,
even when this upgrade is for HW v02 and I have HW v01?
Martin
Link copied. Please paste this link to share this article on your social media post.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Email to a Friend
- Report Inappropriate Content
Link copied. Please paste this link to share this article on your social media post.
Posted: 2021-06-28 11:33 AM . Last Modified: 2024-03-15 04:57 AM
That's to show that it will update the hardware firmware not just the network cards OS and ATS application.
-Gavan
Link copied. Please paste this link to share this article on your social media post.

Posted: 2021-06-28 11:33 AM . Last Modified: 2024-03-15 04:57 AM
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Email to a Friend
- Report Inappropriate Content
Link copied. Please paste this link to share this article on your social media post.
Posted: 2021-06-28 11:33 AM . Last Modified: 2024-03-15 04:57 AM
I upgraded the devices. HW Revision is not updated.
Old versions to new versions:
FW Rev. 3.05 -> 3.0.7
ATS v3.7.1 -> v3.9.2
AOS v3.7.4 -> v3.9.2
Thanks for your help.
Martin
Link copied. Please paste this link to share this article on your social media post.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Email to a Friend
- Report Inappropriate Content
Link copied. Please paste this link to share this article on your social media post.
Posted: 2024-09-27 05:20 PM
Hi I have one of these ATS I need to upgrade the firmware on - the listed firmware above doesnt appear to work. Is there a different firmware for Hardware Revision R01.
Link copied. Please paste this link to share this article on your social media post.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Email to a Friend
- Report Inappropriate Content
Link copied. Please paste this link to share this article on your social media post.
Posted: 2025-01-14 04:28 AM
I have hardware revision R01, and I upgraded it with firmware 3.9.3 and all correct.
https://www.se.com/ie/en/faqs/FA156178/
Model: AP7721
Firmware Revision: 3.0.7
Firmware Date: 03/10/16
Hardware Revision: R01
Manufacture Date: 02/23/2017
Application Module
Name: g2ats
Version: v3.9.3
Date: 01/25/2021
Time: 20:17:41
APC OS (AOS)
Name: aos
Version: v3.9.4
Date: 05/03/2021
Time: 13:50:48
Link copied. Please paste this link to share this article on your social media post.

