Calibrate a Symmetra 40K?

Anonymous user · ‎2021-06-30

I just added a 4th shelf of batteries to my Symmetra 40K a couple weeks ago. Do I need to run a calibrate to get accurate runtime estimates on the control panel? Can I do that w/o affecting all the servers attached to the UPS?

Is it really just as easy as hitting the 'calibrate' button on teh web interface?

EZ_Button_apc · ‎2021-06-30

There are a few steps to the process that you're going to need to complete. It's not as simple as just running a calibration. It would be best for you to call support at 800-890-4272, so they can walk you through the whole process. Please be in front of the UPS and have the serial number handy when you call.

See Answer In Context

EZ_Button_apc · ‎2021-06-30

There are a few steps to the process that you're going to need to complete. It's not as simple as just running a calibration. It would be best for you to call support at 800-890-4272, so they can walk you through the whole process. Please be in front of the UPS and have the serial number handy when you call.