Bypass switching for SMART UPS devices

[Anonymous user]

I will be looking after a mixed estate of ageing Smart UPS devices SRT/SURTXLI etc and I am trying to understand from the user documentation a little more about bypass.   For SURT devices at least, I see reference to a manual bypass switch.

So iss this switch a 'physical thing' on the UPS device, or is it simply a capability to support an optional external switch via a bypass panel ?  I appreciate that bypass can be switched in the software, but I do want to be clear which devices - if any- support local physical switching on the device itself.

Thanks

[BillP]

hi Paul , in the SURT type there is a manual switch to put the ups in bypass, and also have a software bypass  , in the SRT type you only have a remote Bypass for software , anyway in both types you can add an external bypass,

regards.

[Anonymous user]

Thanks.  This is borne out by the product manuals for all but the SURT1000/2000RMXLI.  I guess this small 2U device is the exception?

[BillP · Accepted solution]

surt3000 / 5000 / 6000 /7500 / 8000 AND 10KVA have that manual switch , 1000 and 2000 dont have