APC Smart-UPS 1500

Anonymous user · ‎2021-06-29

Hey all,

I recently got a APC Smart-UPS 1500 from a friend who no longer needed it basically I have not alot of knowledge about these so got it home connected my power cable and plugged it straight into the wall when I did all the lights on the unit flashes at the same time and then nothing and ever since there is no indication of any power or any sign of life in there 😞

is there some special way to start this by pressing buttons in sequence or should I have done something before I plugged it straight in??

Any help I would be greatful thanks in advance 🙂

Anonymous user · ‎2021-06-29

Hey,

thanks very much for your reply 🙂

I openend the unit and had a look inside all connections look fine but I was afriad to touch too many things in there to be honest tried to do that test and still nothing so looks like I'm stuck with a dead unit for now anyway 😞

thanks again for your reply.

See Answer In Context

Anonymous user · ‎2021-06-29

Hey,

thanks very much for your reply 🙂

I openend the unit and had a look inside all connections look fine but I was afriad to touch too many things in there to be honest tried to do that test and still nothing so looks like I'm stuck with a dead unit for now anyway 😞

thanks again for your reply.