AP9630 - upgraded to 5.1.3 and get web application error

czane_apc · ‎2021-06-30

This was originally posted on APC forums on 8/5/2010

Upgraded an AP9630 to 5.1.3 via FTP (did bootmon, then aos, then sumx files, each time the card rebooting) and now I get an application error when trying to hit the webpage. Telnet/ssh and console all work.

Normally if I could set SNMP settings (community, trap, managers, etc) via the console, I wouldn't care as we dislike using web interfaces for management - but alas, we can't.

help!

czane_apc · ‎2021-06-30

This was originally posted on APC forums on 8/5/2010

Upgraded an AP9630 to 5.1.3 via FTP (did bootmon, then aos, then sumx files, each time the card rebooting) and now I get an application error when trying to hit the webpage. Telnet/ssh and console all work.

Normally if I could set SNMP settings (community, trap, managers, etc) via the console, I wouldn't care as we dislike using web interfaces for management - but alas, we can't.

help!

See Answer In Context

czane_apc · ‎2021-06-30

This was originally posted on APC forums on 8/6/2010

It was running 5.1.3... figured it out. For some reason the sumx file didn't go over as binary. Re-uploaded and we're back online.

thanks!
chris

czane_apc · ‎2021-06-30

This was originally posted on APC forums on 8/5/2010

Upgraded an AP9630 to 5.1.3 via FTP (did bootmon, then aos, then sumx files, each time the card rebooting) and now I get an application error when trying to hit the webpage. Telnet/ssh and console all work.

Normally if I could set SNMP settings (community, trap, managers, etc) via the console, I wouldn't care as we dislike using web interfaces for management - but alas, we can't.

help!