Schneider, APC support forum to share knowledge about installation and configuration for Data Center and Business Power UPSs, Accessories, Software, Services.
Send a co-worker an invite to the portal.Just enter their email address and we'll connect them to register. After joining, they will belong to the same company.
You have entered an invalid email address. Please re-enter the email address.
This co-worker has already been invited to the Exchange portal. Please invite another co-worker.
Please enter email address
Send InviteCancel
Invitation Sent
Your invitation was sent.Thanks for sharing Exchange with your co-worker.
Link copied. Please paste this link to share this article on your social media post.
Posted: 2022-05-2004:41 AM
AP9630 does no more boot
Hi,
I wanted to upgrade an AP9630 from v6.9.6 to v7.0.4. The upgrade seemed to worked fine but afterwards I was no more able to login via web interface.
I reset the card and access it via console cable and transfered the firmware via XMODEM but still the card does no more boot. It is stuck on 'Booting AOS'
State S_STARTUP
State S_CONSOLE_WAIT
No Console Link
State S_CHECK_AOS
Verify Module Header CRC
Verify Module Cookie
Verify Module Type
Verify Module Digital Signature
Restarting At 200 MHZ
Booting AOS
Also tried to go back to v6.9.6 but still no luck
BM>sysinfo
Model : AP9630 MAC Address : 00C0B7F395DB Serial Number: ZA1618022868 CPU Speed : 200 Link Port : 3 Warmstart : YES NMI Count: 0
*********** FLASH MODULE INFORMATION *****************
Boot Monitor : Name : apc_hw05_bootmon_109.bin Version : 109 Cookie : 963200 Build Date : Mar 27 2019 Header Crc : D045(PASS) Module Crc : A00A(PASS)
AOS : Name : apc_hw05_aos_696.bin Version : 696 Cookie : 963201 Build Date : Nov 5 2020 Header Crc : 798C(PASS) Module Crc : C9C4(PASS)
APP : Name : apc_hw05_sumx_696.bin Version : 696 Cookie : 963201 Build Date : Nov 6 2020 Header Crc : 7689(PASS) Module Crc : A0CA(PASS)