Schneider Electric support forum for our Data Center and Business Power UPS, UPS Accessories, Software, Services, and associated commercial products designed to share knowledge, installation, and configuration.
Posted: 2021-07-09 04:18 AM
This was originally posted on APC forums on 7/4/2017
Hi all,
I have a few AP7801 PDU that I cannot individually turn on/off each outlet even though it's suppose to be able to?
Am I missing some software or firmware?
Thanks
Posted: 2021-07-09 04:18 AM
This reply was originally posted by Angela on APC forums on 7/5/2017
Hi Michael,
AP78XX series is a Metered PDU which does not offer individual outlet control. Only AP79XX series Switched Rack PDUs support this feature (in addition to other PDUs like AP86XX, AP89XX series).
There is no firmware upgrade you'll be able to apply to AP78XX to add this feature as the AP78XX does not contain the hardware needed to switch the outlets.
Posted: 2021-07-09 04:18 AM
This reply was originally posted by Angela on APC forums on 7/5/2017
Hi Michael,
AP78XX series is a Metered PDU which does not offer individual outlet control. Only AP79XX series Switched Rack PDUs support this feature (in addition to other PDUs like AP86XX, AP89XX series).
There is no firmware upgrade you'll be able to apply to AP78XX to add this feature as the AP78XX does not contain the hardware needed to switch the outlets.
Create your free account or log in to subscribe to the forum - and gain access to more than 10,000+ support articles along with insights from experts and peers.