Ask our Experts
Didn't find what you are looking for? Ask our experts!
Launch of Consumer/Home Owner registration process! We are pleased to announce the commencement of the Consumer/Home Owner Registration Process on Community. Consumers/Home Owners may now proceed to register by clicking on Login/Register. The process is straightforward and designed to be completed in just a few steps.
Schneider, APC support forum to share knowledge about installation and configuration for Data Center and Business Power UPSs, Accessories, Software, Services.
Search in
Free
EnglishStrengthen your foundational knowledge in Data Centers for free, enroll in this path today and start your learning journey!
Link copied. Please paste this link to share this article on your social media post.
Posted: 2021-07-11 10:28 PM . Last Modified: 2024-02-14 03:19 AM
I have an older AP7750 (not 'A') ATS, and am looking to upgrade its firmware. It's currently at v1.10 dated 9-15-05. Is there any newer firmware for it? When I go to the devices page, select the AP7750 and go to firmware, the latest listed appears to be 6.8.2, which appears to be for hardware version 5, so it really shouldn't even be listed under this device.
Is there a way to get whatever the latest firmware is for this generation of ATS?
Link copied. Please paste this link to share this article on your social media post.
Link copied. Please paste this link to share this article on your social media post.
Posted: 2021-07-11 10:28 PM . Last Modified: 2024-02-14 03:19 AM
Thanks, but isn't the 3.x firmware line for the next revision after the one I have, for the AP7750A and similar that don't have the smartslot? And to make it more confusing, in the interface, it shows a ATS firmware version of 1.10, but when I FTP'd to the ATS, what I have in there for files is 'apc_hw02_ats_261.bin' and 'apc_hw02_aos_264.bin', suggesting that it might be FW version 2.6.1, whereas the 3.9.0 version has 'apc_hw02_g2ats_390.bin'.
Link copied. Please paste this link to share this article on your social media post.
Link copied. Please paste this link to share this article on your social media post.
Posted: 2021-07-11 10:28 PM . Last Modified: 2024-01-31 03:01 AM
Link copied. Please paste this link to share this article on your social media post.
Link copied. Please paste this link to share this article on your social media post.
Posted: 2021-07-11 10:28 PM . Last Modified: 2024-02-14 03:19 AM
Thanks, but isn't the 3.x firmware line for the next revision after the one I have, for the AP7750A and similar that don't have the smartslot? And to make it more confusing, in the interface, it shows a ATS firmware version of 1.10, but when I FTP'd to the ATS, what I have in there for files is 'apc_hw02_ats_261.bin' and 'apc_hw02_aos_264.bin', suggesting that it might be FW version 2.6.1, whereas the 3.9.0 version has 'apc_hw02_g2ats_390.bin'.
Link copied. Please paste this link to share this article on your social media post.
You’ve reached the end of your document
Create your free account or log in to subscribe to the board - and gain access to more than 10,000+ support articles along with insights from experts and peers.