ACRP502 COOLING MONITORING

[BillP]

This question was originally posted by Ahmet on APC forums on 6/4/2015

---

Hi All,

Can we receive alert mail with ACRP502 ? If we have, which steps must follow ? 

Or for monitoring, Which unit choise  for temperature informations etc,? 

Thx

[BillP]

This reply was originally posted by L2SupportServices-Cooling on APC forums on 6/5/2015

---

Hello Ahmet. You can receive emails from the ACRP502. You will need to set up the network card on your network and log into the web interface. Under the Administration tab there is a place to set up your email server and the addresses you would like the alerts to go to. Then you will need to go to the notification section to set up on which alerts you would like to have an email sent. For more specifics, I would recommend calling into your local tech support once you have access to the web interface and they can walk you though setting up the emails. 

Thank you

[BillP]

This reply was originally posted by Ahmet on APC forums on 6/8/2015

---

Hi,

Thanks for your answer. Can we set those steps like NMC ? Or any spesific option? Cooling setting like NMC ?

[BillP · Accepted solution]

This reply was originally posted by Ahmet on APC forums on 6/8/2015

---

Thank you so much all informations,