Welcome to the new Schneider Electric Community

It's your place to connect with experts and peers, get continuous support, and share knowledge.

  • Explore the new navigation for even easier access to your community.
  • Bookmark and use our new, easy-to-remember address (community.se.com).
  • Get ready for more content and an improved experience.

Contact SchneiderCommunity.Support@se.com if you have any questions.

Close
Invite a Co-worker
Send a co-worker an invite to the Exchange portal.Just enter their email address and we’ll connect them to register. After joining, they will belong to the same company.
Send Invite Cancel
84587members
353853posts

asi-5-slave-io-link-master-bwu4067

Bihl+Wiedemann GmbH
asi-5-slave-io-link-master-bwu4067
Simple and efficient integration of IO-Link into Schneider Electric applications like PLC M580, PLC M340 using ASi-5. Integration of the point-to-point connection IO-Link into common fieldbus environments is often associated with restricted cable lengths, high wiring effort and expensive Ethernet fieldbus modules. The far more clever solution: ASi-5. The Ethernet connection of all slaves - linked to the ASi network - to the PLC is realized via a single Ethernet connection integrated in the ASi-5/ASi-3 Fieldbus Gateway. Due to piercing technology, slaves can be linked to the ASi cable exactly where they are needed and the fine-grain portfolio is flexible towards individual requirements. Plus, the benefits of ASi can be enjoyed: reduced wiring effort, simple connection to the yellow cable, freedom of topology etc.
2 topics and 0 replies mentioned asi-5-slave-io-link-master-bwu4067
Bihl+Wiedemann GmbH
asi-5-slave-io-link-master-bwu4067
Simple and efficient integration of IO-Link into Schneider Electric applications like PLC M580, PLC M340 using ASi-5. Integration of the point-to-point connection IO-Link into common fieldbus environments is often associated with restricted cable lengths, high wiring effort and expensive Ethernet fieldbus modules. The far more clever solution: ASi-5. The Ethernet connection of all slaves - linked to the ASi network - to the PLC is realized via a single Ethernet connection integrated in the ASi-5/ASi-3 Fieldbus Gateway. Due to piercing technology, slaves can be linked to the ASi cable exactly where they are needed and the fine-grain portfolio is flexible towards individual requirements. Plus, the benefits of ASi can be enjoyed: reduced wiring effort, simple connection to the yellow cable, freedom of topology etc.
2 topics and 0 replies mentioned asi-5-slave-io-link-master-bwu4067
Sort by: