SpaceLogic KNX Forum
Schneider Electric SpaceLogic KNX forum to get support and share knowledge including selection, installation and troubleshooting for spaceLYnk, Wiser for KNX, eConfigure KNX, SpaceLogic KNX Hybrid module and other topics.
Link copied. Please paste this link to share this article on your social media post.
Hi,
I have a wiser4KNX that was registered in the preproduction environment (with the preproduction FW version.
Now I want to move it to the production environment. I tried to install the FW 3.0.0 but I got an error message regarding the signature verification failed.
Before trying to install the production FW, I remove the controller from the cloud.
If you need the MAC of the device for verification you can find it below:
00:80:F4:6D:84:0F
Please let me know how I can resolve this issue.
Best regards,
Vlad.
Link copied. Please paste this link to share this article on your social media post.
Hello Vlad!
To stay on a safe side I would propose to flash the internal SD-Card.
Attached you will find a dedicated Zip-File with a manual, the image-file and the needed tool to flash the card.
Link copied. Please paste this link to share this article on your social media post.
Hello Vlad!
To stay on a safe side I would propose to flash the internal SD-Card.
Attached you will find a dedicated Zip-File with a manual, the image-file and the needed tool to flash the card.
Link copied. Please paste this link to share this article on your social media post.
Dear Thomas,
Thanks for the information! Just today I managed to get time for this. All is ok now.
Best regards,
Vlad
Create your free account or log in to subscribe to the board - and gain access to more than 10,000+ support articles along with insights from experts and peers.