SpaceLogic KNX Hybrid Module vs RGB

[geir_eas_no_bfo]

Hi, 

LSS100400:

I dont understand how to control the RGB lights from a zigbee device.?

There is only  conventional dimmer group adress possibillities?? 

(It`s working through HUE gatway and a script. (it`s to unstable) 

and the point with the Hybrid module is to get rid of all the other gatways)

BR

GIA

[geir_eas_no_bfo]

okay, I see that this LS100400 only support ELKO++ ;( 

--> But Elko does not have RGB dimmers! Is there a workaround by using script through LS100400? 

BR

GIA

[Thomas_Rohde]

Hello GIA!
Sorry, but it is not fully clear to me what you are looking for.
One hand you wrote to "how to control the RGB lights from a zigbee device" which means for me, you have a Zigbee Controller or Pushbutton which you want to use to control a RGB-Light within KNX.
On the other hand I guess you try to link a non SE RGB-Lights (Zigbee) with our Hybrid Module to control it from the KNX-World?