Blind actuator Height F/B Value retain value ?

[IC_Systems]

Hello

Is there a way that the Blind Switch actuator retains the Height F/B Values after Power or Bus failer?

regards,

[Thomas_Rohde]

Hi,

when you have activated the feedback function on the dedicated channel you have some general paramter to define the timing of feedback telegramms after a power loss (KNX).

[IC_Systems]

hello @Thomas_Rohde  

I used the blind actuators not the new spaceLogic

I didn't find the F/B timing setting after power loss,  could you refer to it in the manual or as an image.

regards,

[Thomas_Rohde]

Hello,

can you please let me know the article number of the product.

[IC_Systems]

Thank you for your response @Thomas_Rohde 

I used Blind/Switch Act Like this one: MTN649908

and Blind Act Like this one: MTN649804

regards,

[Thomas_Rohde · Accepted solution]

Hello @IC_Systems 

I checked both type of actuators and the outcome is the same.
You cant define your own timings by these devices. The time is fixed (30s) and cant be adapted like in our new SpaceLogic-Devices. You will find the dedicated text (shown in the picture) with the help of the Link on page 36 (top right). 

System User Guide 

[IC_Systems]

thank you @Thomas_Rohde 

I will try it again in the field and let you know if I face any issues.

regards,