New RemoteConnect DNP3 Basics videos

[MartinChartrand]

Hello everyone,

Patrick McGrath has added two new videos to his excellent series of RemoteConnect instructional videos. These two are the first in a series related to DNP3 Basics as they relate to the RemoteConnect application for SCADAPack x70 Smart RTUs.

Links to the individual videos and the new DNP3 Basics Youtube playlist, as well as the existing RemoteConnect Getting Started playlist are below.

RemoteConnect DNP3 Basics Part 1: Introducing the Test Case: https://youtu.be/zPT29LY4RcY

Remote Connect DNP3 Basics Part 2: Data Classes and Events: https://youtu.be/rNWHjvgNY6E

RemoteConnect DNP3 Basics YouTube Playlist: https://www.youtube.com/playlist?list=PLa7UGrWOTyjkCEOPlYRwAOB7GGFoLy5WS

RemoteConnect Getting Started YouTube Playlist: https://www.youtube.com/playlist?list=PLa7UGrWOTyjlyww9RcENfi8u9i8SKPZ0c

Regards,

M

[MartinChartrand · Accepted solution]

Hello all,

Just an additional note about these videos.

Although the SCADAPack 47x Smart RTU is referenced in these videos, the product is not released yet. We're looking at a 3rd-quarter 2020 release date at this time.

However, any DNP3 functionality demonstrated here in RemoteConnect can be applied to the SCADAPack 57x Smart RTUs, which is currently available.

Regards,

Martin Chartrand

[MartinChartrand · Accepted solution]

Hello all,

An audio error has been detected in Remote Connect DNP3 Basics Part 2: Data Classes and Events.

We have taken the video down temporarily until such time as the error is corrected. This should be done within the next week.

We apologize for the inconvenience and also thank the eagle-eyed (eared?) viewer who caught the error.

Thank you.

Martin Chartrand

[fcantrell]

Thanks for the videos. They are a great help. Keep them coming!

Floyd Cantrell

[MartinChartrand]

Hello again,

DNP3 Basics video part 2 has been corrected and now is available from either its direct link, or the two YouTube playlists as per below.

Thank you!

Martin

RemoteConnect DNP3 Basics Part 2 - Data Classes and Events:

https://www.youtube.com/watch?v=tOXk3Un49fk&list=PLa7UGrWOTyjkCEOPlYRwAOB7GGFoLy5WS&index=3&t=123s

RemoteConnect DNP3 Basics Playlist:

https://www.youtube.com/playlist?list=PLa7UGrWOTyjkCEOPlYRwAOB7GGFoLy5WS

RemoteConnect Getting Started Instructional Videos Playlist:

https://www.youtube.com/playlist?list=PLa7UGrWOTyjlyww9RcENfi8u9i8SKPZ0c

[DavidSkilbeck]

Hello @MartinChartrand,

do any of these videos cover DNP3 file transfer (File Upload).

Thanks,