UA Controller, Transferpact - Wrong status sensed.

[smcpeak]

Normal supply breaker has not tripped but the wrong status is sensed by the controller.

transfer to gen set will occur but return to normal supply will not occur - due to OFF status.

The customer has replaced the following

ua controller,

electrical interlock ive unit.

Replaced one of the nsx630 

SHT voltage release

any ideas would be helpful, I am travelling to this remote location at the end of the week.

Thank you,

sam 

[Araceli_Monje · Accepted solution]

This device is not managed by Protection & Control portfolio, which is the focus for this forum. Could you please connect with your local SE representative so that you can be guided to the right stakeholder/forum/community to get a reply to your question?. Thanks for your understanding.

[NeiB]

Hi @smcpeak ,

Wish you are well.

The right group is for Power Products.

Please post you question on the community from link below:

https://community.se.com/t5/Power-Distribution-and-Digital/bd-p/power-distribution-digital 

Regards, 

Neide