Protection & Control
Schneider Electric support forum about Protection Relays, Substation Controllers & RTUs, Arc Flash Devices & Systems in Medium Voltage and Low Voltage. A place to get support on product selection, installation, commissioning and troubleshooting.
Link copied. Please paste this link to share this article on your social media post.
Hi everyone,
I am having problems connecting to the web server of a Easergy P3U30 remotely. When it's done locally (directly connected to the relay), it works perfectly but, when it's done through a public IP, it just take you to the login page but you cannot pass it. You enter the credentials and nothing happens, it doesn't provide you any feedback.
- Besides enabling the HTTP server, is there anything extra to configure?
- What must be configured on the external network to make it work?
The firmware version is V30.109. The settings are attached.
Beforehand, thank you for your help.
Best regards,
Manuel Trebilcock
Link copied. Please paste this link to share this article on your social media post.
Just adding a video of the problem. The username and password used are conf and 2 respectively.
Link copied. Please paste this link to share this article on your social media post.
You have to update p3u30 with new firmware.
Try with port internal & external 80.
Create your free account or log in to subscribe to the board - and gain access to more than 10,000+ support articles along with insights from experts and peers.