Reading MTZ Protection Status with IEC61850

[YonKhoerul]

Dear Team,.
Good Day,

We have constraints on the data center project and have several EPMS reading systems that read the IEC61850 protection signals through the MTZ ACB Breaker; however, we cannot read the overcurrent and ground signals through the IEC61850 when the signals appear or are detected.

If the IFE/EIFE already supports IEC 61850, can the MTZ ACB follow suit?

Due to the constraints above, I can already read the IEC61850 signal status breaker and standard trip, which are not as specific as the data above.

Please help with the constraints above. Is there any additional configuration on the IFE/EIFE or on the MTZ ACB?

Thanks.

[Manon_Chaboud]

Hello @YonKhoerul, thank you for your post, we'll come back to you!