Welcome to the new Schneider Electric Community

It's your place to connect with experts and peers, get continuous support, and share knowledge.

  • Explore the new navigation for even easier access to your community.
  • Bookmark and use our new, easy-to-remember address (community.se.com).
  • Get ready for more content and an improved experience.

Contact SchneiderCommunity.Support@se.com if you have any questions.

Close
Invite a Co-worker
Send a co-worker an invite to the Exchange portal.Just enter their email address and we’ll connect them to register. After joining, they will belong to the same company.
Send Invite Cancel
84455members
353661posts

New Offer

Power Distribution and Digital

Join experts & peers to learn, share and engage about the key trends of electrical distribution around safety, availability, efficiency and connectivity, as well as power standards & regulations. From design to implementation and operation, let’s discuss how digital and software are transforming your business and your day-to-day work.

Peter_Hall
Lt. Commander | EcoXpert Master Lt. Commander | EcoXpert Master
Lt. Commander | EcoXpert Master

New Offer

New Product Line - First Unit Completed.

 

To comply with the industry requirement for 800VAC equipment on solar and battery storage sites we at Hallson have developed a new product line to enable a feeder pillar to be direct trunk connected to a British Standard ONAN transformer. 

 

The units are connected via a rear busbar connection thus negating the need for cabling. Incoming device is a Schneider Electric MTZ H10 ACB along with DIN NH2 800V rated outgoing fuse ways. the right hand section is used to house TVSS unit, metering equipment and site transformer supply.

 

Hopefully this the start of many more.New 800VAC Feeder PIllar RangeNew 800VAC Feeder PIllar Range

Tags (1)
7 Replies 7
Gregoire_Brun
Lt. Commander Lt. Commander
Lt. Commander
0 Likes
5
877

Re: New Offer

Dear Peter

Thanks for sharing your diferents application for DC, very interresting, but why you didn't use our product for fuse products?

 

https://www.se.com/ww/en/product/LV480857/isfl400-direct-185mm-busbar-screws-m12---fuse-switch-disco... PB107275_1500x1500.JPG

Event if 800V is not on the catalogue  today we can give some test report ok for this network level...

 

Tags (1)
Peter_Hall
Lt. Commander | EcoXpert Master Lt. Commander | EcoXpert Master
Lt. Commander | EcoXpert Master
0 Likes
4
871

Re: New Offer

Hi Gregoire,

 

Thanks for your message.

 

The system that we are using these devices for is 800VAC not DC.

In regard to not using SE DIN fuse ways. We would be very interested in using them (you know us we are always looking to add a bit more 'green' to our panels). However, in the UK at present support and availability of both 400VAC & 800VAC fuse ways is a problem. Maybe you could fix this?? 

 

Additionally we do use 160A units, however these particular units are 250A. Do you have a solution for this @ 800VAC?

 

Best regards,

 

Peter Hall. 

Tags (1)
J_Travostino
Admiral Admiral
Admiral

Re: New Offer

@CeciliaB ,

 

for your information... 😉

 

 

Julien Travostino
Power Distribution & Digital forum community owner
Power Products Div.
Tags (1)
Gregoire_Brun
Lt. Commander Lt. Commander
Lt. Commander
0 Likes
2
854

Re: New Offer

We can give some special agreement to use FuPact ISFL 630 at 400A/800V ac and FuPacT ISFL160 at 100A 800V ac

Iq is on this case 10kA/800A

 

If  needed, please ask CCC to give you some CE conformity certificate.

 

And we will propose ComPacT NSX400 K (trip unit 250 or 400A) soon with Icu 35kA / ICu 10kA very soon

 

 

Tags (1)
Peter_Hall
Lt. Commander | EcoXpert Master Lt. Commander | EcoXpert Master
Lt. Commander | EcoXpert Master
0 Likes
1
851

Re: New Offer

Good morning Gregoire,

 

Thank you for that kind offer. 

 

Can you send me details direct regarding the ISFL offer & maybe the NSX400K offer? I don't want to upset anyone but please if you need send it through the product managers in the UK if you need to. I will be able to discuss with them more in depth than dealing with UK CCC.

 

In regards to pricing i suspect that you will need to discuss with the UK offer managers?

 

Please feel free to discuss anything with me direct as well. 

Tags (1)
Gregoire_Brun
Lt. Commander Lt. Commander
Lt. Commander
0 Likes
0
846

Re: New Offer

Dear Peter

Please send me a private message.

Tags (1)
L_Valentin
Lt. Commander
Lt. Commander

Re: New Offer

Well done @Peter_Hall !!!

 

Congrats !! 👏👍

Tags (1)