Branch Circuit Power Meter (BCPM)

[GaborNovak]

I have a few question about BCPMA084S branch circuit monitor.

Is the 4 current strip an and main board connected together? It is possible to change the main board with another BCPMA084S board. Or the whole systems is calibrated together? The 4 current strip and the main board is calibrated with each other?

The other question is that, where can I find the firmware to the BCPMA modules?

What is the different between the firmware’s?  Is there some release notes?

[Jean_Commeignes]

Hello Gabor, 

Thanks for your questions and interest in BCPM.

My first recommendation is to orient you towards our website:

• Detailed information and documentation on this product :https://www.se.com/ww/en/product/BCPMA084S/bcpm-power-monitoring-advanced---84-solid-core-100-a---19...
• on answers to many questions provided :
  https://www.se.com/in/en/search/BCPM

This being said, BCPM range is extremely specific, so, much more difficult than other Power Metering ranges to document globally.

I strongly suggest you to get in touch with your local Customer Care Center, to benefit a relevant answer.

https://www.se.com/hu/hu/work/support/

Best regards

[GaborNovak]

Thanks for your reply.

So than there is no information about the different BCPM modules and firmware’s? (release notes)

[Jean_Commeignes · Accepted solution]

Sorry Gabor for not being able to provide you a more detailed answer.

Release notes are not available globally.

This kind of information can be accessed through your country Schneider Electric contact.

Best regards