Wadah diskusi seputar PLC,HMI, SCADA dan semua hal seputar otomasi pada proses industri, baik mengenai hal teknis, informasi terbaru dan juga seputar bisnis. Forum ini terbuka unutuk semua system integrator industrial di Indonesia
Send a co-worker an invite to the portal.Just enter their email address and we'll connect them to register. After joining, they will belong to the same company.
You have entered an invalid email address. Please re-enter the email address.
This co-worker has already been invited to the Exchange portal. Please invite another co-worker.
Please enter email address
Send InviteCancel
Invitation Sent
Your invitation was sent.Thanks for sharing Exchange with your co-worker.
Link copied. Please paste this link to share this article on your social media post.
Posted: 2024-08-0510:35 PM
PI_B Block in control expert
Good Morning all,
Its my first time to use a PI_B block in control expert, i am looking for a way to reset the PI_B output to 0 when the unit is stopped.
I have a feedbin on a ATV340 that is linked to a scale on the conveyor belt, a setpoint is set on the HMI and the speed is generated by the PI_B and send to the ATV340.
When ever we stop the plant it seems what value was send to the ATV340 from the PI_B remains the same Auto or manual selection on the PI_B block.
Is there a way to get the value to 0 when the running is stopped or can i just use a move block to send 0 to the ATV340 when unit is stopped?