- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Email to a Friend
- Report Inappropriate Content
Link copied. Please paste this link to share this article on your social media post.
Posted: 2022-04-25 05:48 AM
Mac Addresses identification
Hello
we have a device into a network, is someone able to identify it?
BR Gilles
- Labels:
-
05. Networking & Communication
- Tags:
- english
Link copied. Please paste this link to share this article on your social media post.
Accepted Solutions
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Email to a Friend
- Report Inappropriate Content
Link copied. Please paste this link to share this article on your social media post.
Posted: 2022-04-25 07:16 AM
00:00:54:xx:xx:xx is a generic Schneider Electric MAC address range, used for PLCs (Quantum, M340, M580), Remote I/O (Advantys STB), and other industrial automation equipment. I'm not sure if the latter three octets can be related to specific models though.
- Tags:
- english
Link copied. Please paste this link to share this article on your social media post.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Email to a Friend
- Report Inappropriate Content
Link copied. Please paste this link to share this article on your social media post.
Posted: 2022-04-25 08:24 AM
If it's an M340, M580 or something that uses a similar system, your default IP Address is 84.49.120.212
This comes from converting the last three segments of the MAC Address from Hex to Decimal wiht an 84 prefix.
If somebody changed the address from default, you can reset the processor, or hook up USB and read it from the Ethernet section of the program.
- Tags:
- english
Link copied. Please paste this link to share this article on your social media post.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Email to a Friend
- Report Inappropriate Content
Link copied. Please paste this link to share this article on your social media post.
Posted: 2022-04-25 07:16 AM
00:00:54:xx:xx:xx is a generic Schneider Electric MAC address range, used for PLCs (Quantum, M340, M580), Remote I/O (Advantys STB), and other industrial automation equipment. I'm not sure if the latter three octets can be related to specific models though.
- Tags:
- english
Link copied. Please paste this link to share this article on your social media post.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Email to a Friend
- Report Inappropriate Content
Link copied. Please paste this link to share this article on your social media post.
Posted: 2022-04-25 08:24 AM
If it's an M340, M580 or something that uses a similar system, your default IP Address is 84.49.120.212
This comes from converting the last three segments of the MAC Address from Hex to Decimal wiht an 84 prefix.
If somebody changed the address from default, you can reset the processor, or hook up USB and read it from the Ethernet section of the program.
- Tags:
- english
Link copied. Please paste this link to share this article on your social media post.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Email to a Friend
- Report Inappropriate Content
Link copied. Please paste this link to share this article on your social media post.
Posted: 2022-04-28 10:56 PM
Thanks a lot for these clear helpful clarifications.
BR
Gilles
- Tags:
- english
Link copied. Please paste this link to share this article on your social media post.

