Conext XW+ settings to minimize/eliminate battery discharge for grid support

[Anonymous user]

I recently replaced lead-acid battery bank with LiFePO4 bank in a hybrid system.  Batteries are charging/discharging constantly throughout the day with battery charge used as grid support.  The primary purpose of my system is to have backup power during grid outage.  My desire is to have batteries persistently topped off and only excess solar collection used to support the grid.  What settings would prevent battery discharge while on grid?

[Cranberryman]

I am having a similar problem. The battery is feeding the panel set up for lights, refrig, and freezers. When the furnace blower comes on, the schneider 6848 shuts down and turns on again. The furnace blower is not on the panel, it is on the main panel. My questions are two....1) Why is the battery feeding the house when the grid is up and running? I only want the battery to be working when the grid is down.  and 2) Why does the schneider 6848 shut down and reboot when a power load comes on from the main panel?  Thanks for any help.