BMXNOM0200 READ_VAR address

[John88]

Hello.

I am using a BMXNOM0200 card on M580 system. It's located at the slot 7. How do I suppose to program the ADR for READ_VAR?

Should I use ADDM or ADDMX?

Thanks all.

[YONGHO-KIM]

Please refer to the picture above.
If you have any additional questions, please reply.

[PetrBC]

If you use only local racks, you can use ADDM and 'r0.s0.ch0.d.MBS' clause, where r0=0, s0=7, ch0=number of channel where the slave is connected, d=slave ID. For hardware settings, refer to the user manual for NOM EIO0000002696.