M221 - Using the Pulse generator output TTL to control a stepper motor

[DC3]

Could anyone share any examples or explain the pulse generator output setup to control a stepper motor ?

Customer is replacing a AB PLC and would like to use the M221 based on the pulse output feature. 

Are there any details as to how to setup the pulse generator and any programming functions built in ?

[BevanWeiss]

It will depend on the wiring of your stepper motor controller (NOTE: It will not directly drive a stepper motor, it will require a controller which takes in either Pulse/Direction or CW/CWW Pulse inputs)

This is likely the document you'd want to reference

https://download.schneider-electric.com/files?p_enDocType=User+guide&p_File_Name=EIO0000002007.05.pd...

Starting at about page 103 (Pulse Train Output)

[vkumar]

Hi, 

I have simple stepper motor application, how to program the TM200CE24T controller using PTO for stepper motor controller?

The link above is not valid link.

Thanks

[Bastian_Schmitz]

Hi, I´m not a specialist in this topic, but in the software is a project integrated which use PTO funciton. It is combined with a servo instead a stepper. You find the project an the documention in this way