Data transfer Elau Pacdrive MAX-4 & C400 OPC DA

[Anonymous user]

Hello,

I am a maintenance engineer and would like to access some data (machine speed, processed quantity) from two PacDrives in our plant. I have made some research and my plan is:

1. Read data from controller (client) to OPC DA server.

2. OPC DA to OPC UA conversion.

3. Data analysis from OPC UA data

Problem is, I have never worked with Electric Schneider controllers in my career, but Siemens. When I used SE Diagnostic software it was not possible to perform a complete data collection. I was able to see only Communication Log.

Could you please point me in the right direction:

- where to buy/download ELAU PacDrive Automation Toolkit EPAS

- where can I find some tutorials to enable OPC DA on PacDrive controllers

- where to get OPCConfig.exe
- where to find/buy SE drivers for industrial PC (Windows)

Information on PacDrive controllers:

1. MAX-4/11/03/12899/1/0/00, 13130255-004, HW: H494A9, SW: 00.11.09, 570460.0030, X19, RS232 (X5)

2. C400/A8/1/1/1/00, 13130261-001, HW: 2IC3100463, SW 00.16.42, 911707.0050, 2409, Ethernet (X10)

Any comment/help would be much appreciated.

Best Regards,

Modan

[Daryl]

Hi Modan

Hope you are well.

If you send me an email I have software that I believe will help without you having to do any development and you could have it up and running as soon as we can get it to you.

If you send me an email to daryl.ridgley@motion-control.co.uk including all your information from the message above I would be happy to help.

It would be very interesting to understand how much PacDrive equipment you have and a bit of background on your company would be good to.

I look forward to hearing from you.

Many thanks

Daryl Ridgley