Communication PacDrive and Lexium32 with Profinet

[AndreaArduini]

Good mornig everyone, 

which library could I use to control a Lexium32 with PacDrive LMC402 in Profinet ?

Is the "GMC Independent Lexium" the right library ?

Thanks a lot

Andrea

[HattoriHanzo]

Hi

The GMC Independet Lexium" and also the "GMC Independent PLCopen MC" are made for CanOpen, EthernetIP and ModbusTCP and are not compatible for Profinet.

And for PacDrive the Librarys are only for CanOpen compatible.

https://product-help.schneider-electric.com/Machine%20Expert/V2.1/en/MotCoLib/index.htm#rhfulllayout...

https://product-help.schneider-electric.com/Machine%20Expert/V2.1/en/SoLibOv/index.htm#t=SoLibOv%2FD...

The only solution I see is to control the LXM32M/Profinet without a library. I have attached an example project with a different controller (M251) and via ModbusTCP. But the IO mapping is the same for Profinet. Take a look.
I have also attached the Profinet GSD file for the LXM32.
Greetings

[AndreaArduini · Accepted solution]

Thanks a lot....  very usefull.

Andrea.