Subscribing is a smart move!
You can subscribe to this board after you log in or create your free account.
Regarding Machine Expert V1.2.11 Issue
Machine Automation Forum
A forum addressing machine automation solutions for the complete machine lifecycle. Including offers like Machine Advisor, Modicon PLC/PacDrive, Lexium or Preventa. Discuss and share knowledge on offers relating to cloud-based service platforms, machine localization and monitoring, industrial operations control, motion products as well as safety function!
Invite a Co-worker
Send a co-worker an invite to the portal.Just enter their email address and we'll connect them to register. After joining, they will belong to the same company.
Send Invite Cancel
Link copied. Please paste this link to share this article on your social media post.
Hello all,
I faced with a IP set issue of M251 with Machine Expert Version 1.2.11 (Which is V1.1 License)
Issue : IP address is changed to that I've never set up.
I proceeded in the following order.
- PC β M251 : Download program via USB MINI-B(Disconnect cable after complete)
: ETH1 IP : 192.168.0.141 / 255.255.255.0
: ETH2 IP : 192.168.10.141 / 255.255.255.0 - PC β M251 : Scan network via Ethernet. After scanning, Login(Connect) to 192.168.0.141.
- After power reboot,
: IP address is changed to 11.11.190.79 / 255.255.255.0
: sometimes it is recovered its IP address what it should be.
I tested 5 of TM251MESE.
And this happened always with M251 PLCs.
And this issue is solved right after by using Machine Expert V.2.0
I am pretty sure, there is software issue on V1.2.11.
Is there any plan to fix the issue?
If not, Is there any plan to release upgrade license?
Thank youπ
Create your free account or log in to subscribe to the board - and gain access to more than 10,000+ support articles along with insights from experts and peers.