Welcome to the new Schneider Electric Community

It's your place to connect with experts and peers, get continuous support, and share knowledge.

  • Explore the new navigation for even easier access to your community.
  • Bookmark and use our new, easy-to-remember address (community.se.com).
  • Get ready for more content and an improved experience.

Contact SchneiderCommunity.Support@se.com if you have any questions.

Close
Invite a Co-worker
Send a co-worker an invite to the Exchange portal.Just enter their email address and we’ll connect them to register. After joining, they will belong to the same company.
Send Invite Cancel
84398members
353586posts

Lexium P4 Robot configuration

Machine Automation Forum

A forum addressing machine automation solutions for the complete machine lifecycle. Including offers like Machine Advisor, Modicon PLC/PacDrive, Lexium or Preventa. Discuss and share knowledge on offers relating to cloud-based service platforms, machine localization and monitoring, industrial operations control, motion products as well as safety function!

Solved
PierpaoloA
Schneider Alumni (Retired)
Schneider Alumni (Retired)
0 Likes
1
986

Lexium P4 Robot configuration

Hi everyone,

 

For a customer's request, I would like to have a quick guide or a how to about how to add and configure a Lexium P4-Robot in EcoStruxure Machine Expert.

Does anybody have such a documentation?

 

Thanks a lot for your help,

Pierpaolo

Tags (1)

Accepted Solutions
LeTomas
Lieutenant Lieutenant
Lieutenant
0 Likes
0
974

Re: Lexium P4 Robot configuration

Dear @PierpaoloA 

 

There is a step-by-step video instruction showing all the neccessary steps to add a Lexium P Robot to your application project.

Please check this How-To video: https://schneider-electric.box.com/s/1jwz11242pvdbqrxxveeixmpexlogudi

 

Let us know if you need any further information.

 

Kind regards,

 

Leandro

 

See Answer In Context

Tags (1)
1 Reply 1
LeTomas
Lieutenant Lieutenant
Lieutenant
0 Likes
0
975

Re: Lexium P4 Robot configuration

Dear @PierpaoloA 

 

There is a step-by-step video instruction showing all the neccessary steps to add a Lexium P Robot to your application project.

Please check this How-To video: https://schneider-electric.box.com/s/1jwz11242pvdbqrxxveeixmpexlogudi

 

Let us know if you need any further information.

 

Kind regards,

 

Leandro

 

Tags (1)