Welcome to the new Schneider Electric Community

It's your place to connect with experts and peers, get continuous support, and share knowledge.

  • Explore the new navigation for even easier access to your community.
  • Bookmark and use our new, easy-to-remember address (community.se.com).
  • Get ready for more content and an improved experience.

Contact SchneiderCommunity.Support@se.com if you have any questions.

Close
Invite a Co-worker
Send a co-worker an invite to the Exchange portal.Just enter their email address and we’ll connect them to register. After joining, they will belong to the same company.
Send Invite Cancel
84248members
353347posts

Lexium 28 UL Testing / TVDA

Machine Automation Forum

A forum addressing machine automation solutions for the complete machine lifecycle. Including offers like Machine Advisor, Modicon PLC/PacDrive, Lexium or Preventa. Discuss and share knowledge on offers relating to cloud-based service platforms, machine localization and monitoring, industrial operations control, motion products as well as safety function!

VaughnKretzmann
Ensign
Ensign
0 Likes
0
275

Lexium 28 UL Testing / TVDA

We are building machines for export to the USA and need a cost effective solution for the simple machines.   The Lexium 28 does have UL approval but most of our customers only have a 460V 3phase industrial supply available.   Is there any documentation recommending which transformer can be used to achieve UL approval using the Lexium 28 at 460V 3phase which we can give to our client to accept the Lexium 28.  TVDA? We are aware that the Lexium 32 is rated up to 480V 3 phase and we have already shipped our first machine to the USA with the Lexium 32 and BSH motors.  However we need a more cost-effective solution as these are only 0.75kW & 1.0kW applications and they are only used to position a section of the machine and then do not move during production.

Tags (1)