BCP Device Manager showing up with the BACnet Device Manager

Notifications

Building Automation Knowledge Base

Schneider Electric Building Automation Knowledge Base is a self-service resource to answer all your questions about EcoStruxure Building suite, Andover Continuum, Satchwell, TAC…

Invite a Co-worker

Send a co-worker an invite to the portal.Just enter their email address and we'll connect them to register. After joining, they will belong to the same company.

Send Invite Cancel

Related Forums

Intelligent Devices Forum

Previous Next

Invite a Colleague

Found this content useful? Share it with a Colleague!

Invite a Colleague

Back to Building Automation Knowledge Base

2207 Views

Link copied. Please paste this link to share this article on your social media post.

Trying to translate this page to your language?

Select your language from the translate dropdown in the upper right.

Translate to: English

Issue

Double clicking the BACnetNetwork used to open the BACnet Device Manager now it opens a BCP Device Manager that looks just like the BACnet Device Manager? What is the BCP Device Manager?

Environment

I/A Series (Niagara) G3

Cause

Installing Distech software to support their devices will result in the BCP Device Manager being installed for the BACnetNetwork.

Resolution

This is not an issue, just be sure to select the correct Device Manager for the devices you plan to work with.

To The Top!

BCP Device Manager showing up with the BACnet Device Manager

Related Forums

Intelligent Devices Forum