Welcome to the new Schneider Electric Community

It's your place to connect with experts and peers, get continuous support, and share knowledge.

  • Explore the new navigation for even easier access to your community.
  • Bookmark and use our new, easy-to-remember address (community.se.com).
  • Get ready for more content and an improved experience.

Contact SchneiderCommunity.Support@se.com if you have any questions.

Close
Invite a Co-worker
Send a co-worker an invite to the Exchange portal.Just enter their email address and we’ll connect them to register. After joining, they will belong to the same company.
Send Invite Cancel
84248members
353347posts

Unable OPC-UA connection using UAExpert

Industry Automation and Control Forum

This forum is addressing industrial automation design & engineering, operations, asset performance, cyber security and digital transformation for Plants & Machines.

hgazzeh
Cadet

Unable OPC-UA connection using UAExpert

Hello,
I'am new to Schneider plcs, i need to enable the OPC-UA connexion to ua expert using unity XL pro and get the used port for OPC connection. I did it for siemens plcs using tia protal but i didn't dont know how to do it in schneider environment. 

 

This is kind what I'm looking for but at the Siemens environment.

 

any suggegtions please ? 

 

Thanks

 

Attachments
Tags (1)
1 Reply 1
HenriqueNeri
Crewman
Crewman
0 Likes
0
325

Re: Unable OPC-UA connection using UAExpert

Hi,

 

This is a problem that I've also gone through. Today I know two ways to communicate OPC UA with Unit Pro Controllers.

 

- EcoStruxure™ OPC UA Server Expert (M580 and M340)
- BMENUA0100 - OPC UA module for M580

 

Unfortunately controllers do not have this technology natively, I hope that one day Schneider will embed this protocol natively in the controller.

Tags (3)