Trying to connect to a Modbus device listening on a specefic port

[Kik]

Hello team,

I'm trying to add a Niryo NED3 robot with modbus protocol in my DTM browser but the robot is listening on port 5020, not 502. How can I specify this specific port ?

In advance, thanks

[Ricard · Accepted solution]

Hello my friend @Kik 

This is not possible, you can't mange the port of modbus, sorry

BR

Ricard

[Kik]

Thanks Ricard. I found a workaround: I'll use Linux Socat to translate ports.