Does ATV610 and ATV310 communicate with Somove

[Mohamed-ATV]

Hello everyone

I need to configure some ATV610 VFDs, is it possible to use Somove ? 

Thanks in advance for your answers 

[Bastian_Schmitz · Accepted solution]

Short answer, ATV310 and ATV610 are not supported from SOMOVE. I did not know any plan to integrate them.

[StevenCho · Accepted solution]

For Now, there isn't.

But I heard that next generation of ATV610 will support it. But do not know about ATV310.

[win3xzaga]

We already tried to connect SOMOVE to ATV610 and we have done it several times on our projects. Attached is a sample using ATV610 Demo Unit.Somove connection on ATV610Tesing with Demo Unit

[win3xzaga]

We have successfully connected ATV610 using SOMOVE software. We done these on several projects we have completed.

[win3xzaga]

https://1drv.ms/v/c/f908846878b53c4a/Eaw6m6i-zddEvVldox4LQfIBUBfXBZfd_dvn9pkTJBFntQ?e=QbzO4A

[EKuznetsov]

@win3xzaga 

Thanks. Interesting, how did you do this? Where you found DTM for ATV710?

[win3xzaga]

From way back I been using my old laptop connecting to the VFDs on our projects with previously Power Suite, PC Soft and now SOMOVE. It is running on Windows 7 with a little twitch on booth up. Since then we are collecting programs from VFDs and have it on our data base. DTM use for ATV610 is from ATV6xx that's way the display shows ATV Process. However, we really can not connect on ATV310.

[EKuznetsov]

@win3xzaga 

Hello. Thanks. That's really interesting. You connect to ATV610 via Modbus Serial from ATV6xx DTM and SoMove has correctly recognized  that actual model is ATV610? And you was able to parametrize and diagnose ATV610?