M172 - Dashboarding for multiple remote units

[Dclyde]

Can anyone tell me if it is possible to remotely view the status of an M172 that is operating a fan by monitoring a temperature?  See the fan operating status (on/off) and the temperature sensor.

The user would like to shut the fan off manually from the same interface. I imagine a phone with a browser looking at the Webvisu would be the way to go. Use the RUT23 wireless gateway to expand the network or plug into the plant network.

Ultimately the user would like to shut down multiples of these systems down with a single "shut down switch" .  Ultimately shut down up to 100 fans with a single HMI button or signal.

What software package can do this?  Machine advisor or Machine SCADA Lite?

[Bastian_Schmitz]

Hi,

Machine Advisor could read at the moment only data. A writing of data is maybe possible in the future.

Are all TM172 are connected in the same ethernet network in your installation?

Problem could be the number of controllers. Because you need a system which could handle 100 Modbus slaves.

I´m not sure if HMISTM6BOXIOT with Scada Experte 500 Tag Runtime could handle so many slaves. In any case you limit will be 500 values. 

Tell us more about the configuration, maybe someone has a great idea.