Subscribing is a smart move!
You can subscribe to this board after you log in or create your free account.
How to configure an AI on TM172
HVAC and Pumping Forum
Support Forum for HVAC and pumping machines, Modicon M17x and EcoStruxure Machine Expert HVAC software for chillers, AHU, CRAC units for datacenters or process chillers applications - from design, implementation to troubleshooting and more, by Schneider Electric.
Invite a Co-worker
Send a co-worker an invite to the portal.Just enter their email address and we'll connect them to register. After joining, they will belong to the same company.
Send Invite Cancel
Solved
Go to Solution
Link copied. Please paste this link to share this article on your social media post.
Accepted Solutions
Link copied. Please paste this link to share this article on your social media post.
Hello,
AI of M172 must be basically configured 2x2, -32765 is returned when the AI are not properly configured, -32768 is returned when input is in error state.
This is the rule to be followed for each couple of AI:
Link copied. Please paste this link to share this article on your social media post.
Hello,
AI of M172 must be basically configured 2x2, -32765 is returned when the AI are not properly configured, -32768 is returned when input is in error state.
This is the rule to be followed for each couple of AI:
Create your free account or log in to subscribe to the board - and gain access to more than 10,000+ support articles along with insights from experts and peers.