ViewX Crash on Mimic Opening when Anti-Alias Enabled

Notifications

Geo SCADA Knowledge Base

Access vast amounts of technical know-how and pro tips from our community of Geo SCADA experts.

Invite a Co-worker

Send a co-worker an invite to the portal.Just enter their email address and we'll connect them to register. After joining, they will belong to the same company.

Send Invite Cancel

Invite a Colleague

Found this content useful? Share it with a Colleague!

Invite a Colleague

714

Link copied. Please paste this link to share this article on your social media post.

Originally published on Geo SCADA Knowledge Base by Anonymous user | June 10, 2021 03:10 AM

📖 Home Back
There have been cases reported where ViewX will crash on opening certain mimics. In these cases, analysis of the crash dumps has found machine specific problems related to the drawing of mimics with anti-alias enabled.

The crash appears to be in the Microsoft GDI+ graphics library, where it is attempting to render anti-aliased edges. This might be caused by a problem with graphics drivers or GDI+. You can check to see if anti-aliasing is turned on, and if so try turning it off.

To do this:

Run ViewX.

Open the "Tools" - "Options" dialog.

Select the "Mimics" Tab

Uncheck the option "Enable Anti-Aliasing".

The first solution is to turn off anti-aliasing and see if this fixes the problem. You could also try to update graphics card drivers and see if this solves the problem.

Go: Home Back

Author

Anonymous user

To The Top!

ViewX Crash on Mimic Opening when Anti-Alias Enabled