Creating a Custom Aggregate Without Config Fields

Notifications

Join our "Ask Me About" community webinar on May 20th at 9 AM CET and 5 PM CET to explore cybersecurity and monitoring for Data Center and edge IT. Learn about market trends, cutting-edge technologies, and best practices from industry experts.
Register and secure your Critical IT infrastructure

Geo SCADA Knowledge Base

Access vast amounts of technical know-how and pro tips from our community of Geo SCADA experts.

Invite a Co-worker

Send a co-worker an invite to the portal.Just enter their email address and we'll connect them to register. After joining, they will belong to the same company.

Send Invite Cancel

Invite a Colleague

Found this content useful? Share it with a Colleague!

Invite a Colleague

676

Link copied. Please paste this link to share this article on your social media post.

Originally published on Geo SCADA Knowledge Base by Anonymous user | June 10, 2021 12:58 AM

📖 Home Back
If you add a custom aggregate that has no config fields, a tab will not be created on the parent object's property pages. You will therefore not be able to enable the aggregate via ViewX (using the "enabled" tick box).

This means the aggregate will not be instantiated and other fields (data/dynamic) will not be available.

A workaround is to set the aggregate to be "Fixed" as below.

Go: Home Back

Author

Anonymous user

To The Top!

Creating a Custom Aggregate Without Config Fields