ComX 210 v4.0.10 Firmware Question

jeffrey_givens · ‎2017-11-22

Hello ComX Team,

I'm testing the new firmware out on a device here in the office. I noticed that there's no selection for "DSP" in the Publication Settings -> Destination Platform; however, the Schneider Electric Services tab still has a "DSP Connection Management" option.

Should DSP still be available through the dropdown menu in Publication Settings or has the functionality changed?

Thanks,

Jeff

Anonymous user · ‎2017-11-28

Hi Jeffrey,

Great question! On v4.0.10, customers must first enable Schneider Electric Services before DSP will become available in the Publication drop-down menu. This was to eliminate confusion where customers may select DSP as the publication platform, but not know to enable SES. There is a brief note about this in the Release Notes.

Best,

Colton

See Answer In Context

Anonymous user · ‎2017-11-28

Hi Jeffrey,

Great question! On v4.0.10, customers must first enable Schneider Electric Services before DSP will become available in the Publication drop-down menu. This was to eliminate confusion where customers may select DSP as the publication platform, but not know to enable SES. There is a brief note about this in the Release Notes.

Best,

Colton

jeffrey_givens · ‎2017-11-28

Thanks for the response, Colton! Panic mode disabled 🙂