Com´X510 with ZigBee and Thermal Sensors

[AndersDahlskog]

Hi

Any experiences regarding to monitor thermal sensors mounted eg on busbars in switchgears (Energy product) in Com´X510 using Zigbee module ?

Best Regards

Anders

[Randi_Dolan]

Hi Anders,

Are you asking about the TH110?  This device is not currently supported in the Com'X.  However, we have added it to the firmware that we are currently working on and this feature will be available when the next version of Com'X is released.  The target date for this release is June 2019.

Best regards,

Randi

[SESA528]

Hi @Randi_Dolan ,

I connecting ZBRN to COM'X210 via RS485. But when I create new device in Com'X, i can't see ZBRN? Pls help me. Thanks

[Randi_Dolan]

Hello,

The ZBRN is not supported by the Com'X.  However, you could create a custom device model to support this configuration.  The Modbus Register List for the ZBRN is found on page 101 in this document.

The Com'X User Guide, describes how to create a custom device model on page 86.

I hope this helps.

Randi

[Romain_Polette]

Hello @SESA_B , 

Please check this thread.

https://community.se.com/t5/Gateways-and-Energy-Servers/How-to-get-Modbus-register-of-the-Wireless-T...

We give some advice to build your Custom Model to connect ZBRN32 to the Com'X.

Let me know if you have other questions.

Regards.

[SESA528]

Hi @Romain_Polette ,

Thanks for your support

[SESA528]

Hi @Randi_Dolan ,

Thanks for your support