Before upgrading to version 1.3.5, it is necessary to install Version 1.1.20

[Anonymous user]

When you have a Com'X with a version A, if you want to upgrade it into version E, "Normally" it is not necessary to apply the intermediate upgrade B,C and D, You can directly upgrade from A to E.

But there is one exception : The version 1.1.20 is a mandatory step

(This is due to the fact that before those version, the firmware was not signed by =S=)

For instance if you have a version 1.0.11, you can upgrade to 1.1.20 and then 1.3.5 (it is not necessary to apply intermediate version 1.0.14 nor 1.1.14)

NOTE : Since January 2015, all Com'X at Newlog repositrory have been upgraded to version 1.1.20