Welcome to the new Schneider Electric Community

It's your place to connect with experts and peers, get continuous support, and share knowledge.

Close
Important Announcement: WELCOME to the new Schneider Electric Community! Community is now no longer part of Exchange, and is now rebranded under se.com. If you have any bookmarks and links saved, we request you to update them to ensure that you continue accessing our community from this new location. For any issues that you might encounter as part of this change, please reach out to SchneiderCommunity.Support@se.com, and the team will help to get your issues resolved.
Invite a Co-worker
Send a co-worker an invite to the Exchange portal.Just enter their email address and we’ll connect them to register. After joining, they will belong to the same company.
Send Invite Cancel
82431members
349946posts

Kapan breaker LSIG digunakan?

Expert on Demand for Standards & Regulations

ArtawanSiregar
Crewman
Crewman
0 Likes
3
114

Kapan breaker LSIG digunakan?

Siang, kira-kira kapan ya breaker LSIG digunakan? Terima kasih

Tags (1)
3 Replies 3
HelvinHermanT
Captain Captain
Captain
0 Likes
1
111

Re: Kapan breaker LSIG digunakan?

The letters LSIG signify the type of protection and available adjustments on certain trip units.

  • L = Long Time (overload protection, analygous to the inverse-time thermal trip of a thermal/magnetic breaker)
  • S = Short Time (short circuit protection of low level faults)
  • I = Instantaneous (short current protection of high level faults, analagous to the instantaneous magnetic trip of a thermal/magnetic breaker)
  • G = Ground Fault (equipment ground fault protection)

LSIG = Long-time + Short-time + Instantaneous + Equipment Ground-fault Protection.

 

Pak @Dwinanto_Setyadi @HendySE @sesa23155 jika ada yang mau ditambahkan.

Tags (1)
jameslandry
Crewman
Crewman
0 Likes
0
67

Re: Kapan breaker LSIG digunakan?

Hi, guys.
Are Inverse time circuit breakers also known as thermal-magnetic circuit breakers?

Tags (1)
faisalamir
Lieutenant JG Lieutenant JG
Lieutenant JG

Re: Kapan breaker LSIG digunakan?

Breaker dengan LSIG protection digunakan untuk aplikasi dengan kebutuhan diskriminasi total sistem proteksi antar breaker terkait proteksi overload dan short circuit. Sedangkan proteksi arus gangguan tanah menggunakan metode residual netral protection. proteksi arus gangguan tanah ini digunakan untuk proteksi dari potensi kejadian short circuit phase ke ground atau ketidaksetimbangan sistem phase yang mengakibatkan arus mengalir di konduktor netral

 

Breaker dengan LSIG protection aplikasinya banyak digunakan di panel utama di breaker incoming dimana mendekati sistem penyulang utama. koordinasi proteksi dengan breaker dibawahnya dengan metode diskriminasi 

 

Semoga membantu 

Tags (1)